Home > Products

Ultrasonic Thickness Gauge UE0068 (with Coating mode)

UE0068 is a ultrasonic thickness gauge which with coating mode, when there has paint coat on the surface of testing object, the UE0068 can measure it directly without remove the paint coat, during the coating mode, the instrument will use echo to echo method to measure the thickness, it will save a lot of time of inspector.

Additional information

Weight	0.2 kg
Dimensions	15 × 7.3 × 3.2 cm
Warranty:	12 months
Delivery Time:	1-2 weeks
Standard:	ISO9001:2000

Description of Ultrasonic Thickness Gauge UE0068 (with Coating mode)

UE0068 has 0.1mm resolution and the measurement range is from 0.8mm to 300mm; user can select inch or mm as measurement unit, and it has 2 types of probe zero adjustment, 1-point calibration when do normal measurement, and 2-point calibration when do curve surface measurement or other special application with a high precision.

Features:
With coating mode, inspector can measure it without remove the paint coat.
Thinnest Value Catching: Move the probe along the surface of the testing material, UE0067 can catch the thinnest point.
Alarm Function: If the measured value exceeds the pre-set high thickness limit or lower than low pre-set limit, the alarm function will start.
Support millimeter and inch two thickness units
With 0.1mm resolution.
500 testing data can be saved
2 types of probe zero adjustment, 1-point calibration when do normal measurement, and 2-point calibration when do curve surface measurement or other special application with a high precision.
Auto-off function

Main Specifications:
Operating principle:	Standard mode: P-E (pulse-echo) method with dual-element probes Coating mode: E-E (echo-echo) method with dual-element probes
Probe zero adjustment:	Selectable: 1-point calibration: normal measurement 2-point calibration: curve surface measurement or other special application with a high precision
V-path correction:	Automatic
Measuring range:	0.8mm to 300mm; 0.031in to 11.81in in standard mode 3.0mm to 18.0mm; 0.118in to 0.709in in through coating mode Depending on probe, material and surface condition
Digital resolution:	0.001in or 0.1mm
Units:	Selectable: inch or mm
Display:	128×64 dot-matrix LCD screen (1.65in×2.24in; 42mm×57mm) EL backlight and switchable contract ratio Digit height: 0.54in or 13.75mm
Measurement update rate:	4 Hz in standard measurement mode 25 Hz in MIN capture mode
Material velocity range:	1000 to 9999 m/s; 0.039 to 0.394 inch/µs
Power:	Two 1.5V AA alkaline batteries Warning with low battery voltage
Operating time:	Up to 200 hours (without backlight) with alkaline batteries, depending on operating mode
Auto shut-off:	After 5 minutes of non-use
Operating temperature:	-10℃ to +50℃; +14℉ to +122℉ Specification to -20℃/-4℉ on request
Size:	5.86in×2.87in×1.25in; 149mm×73mm×32mm (H×W×D)
Data logger capacity:	Up to 500 readings can be divided into a maximum of 5 files (user-selectable)
Measuring error:	Up to 1in: ±0.002in or ±0.1mm Above 1in: ± 1%H H is the height of the testing object
Repeatability:	±0.001in or ±0.1mm
Application software:	Yes
Interfaces:	Serial RS 232C port in combination with a communicative cable; Data transfer parameters: 8 bits, 1 stop bit, 9600 baud, no parity.
Standard package:	Thickness gauge Standard probe (PT-08) Carrying case Two 1.5V AA alkaline batteries Couplant Operating manual Certification of quality Packaging list
Optional accessories:	Attachable rubber case Numerous special probes on request Couplants and high-temperature couplant 4-step/6-step block for calibration Data transmission cable Application software