TRL Ultrasonic Transducer UT0018

TRL Ultrasonic Transducer can be used in macrocrystal welding , attenuating materials and austenite welding inspection; it has excellent near surface resolution and low scattering noise; this ultasonic probe with LEMO-00 (C5) connector.

Independent transmit and receive crystals, refracting ultrasonic beam angles and creates certain focal length in workpiece

Features
No initial pulse dead zone effects
Less scattering, higher SNR in high attenuation
material
Probe face can be processed into different shapes to
ensure good coupling with workpiece: AID(Axial
Inside Diameter), CID(Circumferential Inside
Diameter), AOD(Axial Outside Diameter),
COD(Circumferrential Outside Diameter)
Two types of performance probes can meet most of
detection needs

PL – Universal Series:
Ideal for high sensitivity and penetration applications,
less resolution and bandwidth required environments

C – Composite Series:
High penetration power and high SNR for coarse-

Applications
Nuclear Power Station
Austenitic Stainless Steel
Near Surface Flaw Detection
Plate Weld Inspection
High Attenuation Materials

Instructions
C – Composite Series is the default probe type
Default built-in delay lines, for external delay lines of
3~3.5mm can be customized
Default probe is without irrigation holes, which can be
customized
FS means Sound Path, FD means Focal Depth,
Conversion of FS, FD and β is: Cosβ=FD/(FS+0.5D),
where D is diameter
Lemo 00(C5) Top Mounting Connectors, Side
Mounting can be customized

You may also be interested in:

Soft Protective Membrane Probe UT0016

Immersion Ultrasonic Transducer UT0011a

Immersion Ultrasonic Transducer UT0011b

Normal Beam Ultrasonic Transducer UT0015c

Dual Element Ultrasonic Transducer UT0012

Angle Beam Ultrasonic Transducer UT0014a