Immersion Ultrasonic Transducer UT0011

Immersion Ultrasonic Transducer UT0011 can be used to test Parts with irregular or complex geometric shapes, or detection for high resolution required applications; it is match with Hydroacoustics performance to improve efficiency, and can be focused in spot (spherically) or line (cylindrically), to improve resolution, sensitivity and Signal-to-Noise ratio.

Features
Strong Pressure and Corrosion Resistance
Excellent Acoustic Impedance in Water or OTHER Liquids, 1/4 wavelength of matching layer can ensure maximum power outputs No Coupling Issues between Probe and Liquid
Acoustic Beam can perform Spherical Focusing (F) or Line Focusing (CF), to increase ability of defect identifications

Applications

Fast detection of Plates, Pipes or
other workpiece
For automated scanning system of
material analyze imaging

PL – Universal Series:
Ideal for high sensitivity and penetration applications, less resolution and bandwidth required environments

PH – Short Pulsing Series:
High damping and bandwidth, high SNR for high attenuation material detection, good resolution for precise thickness measurements and near surface detection environments

C – Composite Series:
High penetration power and high SNR for coarse-grained, fiber-reinforced composite materials

Instruction：
1. Most of immersion probes working between -10°C(14°F) to 55°C(131°F); For lower Min Temp may cause sensitivity drop, and for exceed max temp may cause malfunction of internal of probe.
2. Due to epoxies as matching layer and with certain water absorption rate, Immersion time should control less than 8 hours and working again after

European Standard – l1
Top Mounting with 1.8 meter or 2.5 meter cable
length, cable end with Lemo 01 (C9) Connector

You may also be interested in:

Dual Element Ultrasonic Transducer UT0013

Immersion Ultrasonic Transducer UT0011a

Immersion Ultrasonic Transducer UT0011b